Thread: Thinking about doing 300zx brakes on my b13.

I have been tossing this idea up for a while now. I really want some good stopping power on my car and I think that the Z32 calipers would be perfect. Unlike the brembos they are easier and way cheaper to come by and you can run smaller than 17 inch wheels. I have also yet to see this on a b13, although if anyone has please feel free to post up what you did to get them to fit.

Here you go

Thanks. Looks like I will be hitting the junkyard this week. Now I have to find some universal wheels that actually look good.

Now is there a reason I can't use my hubs with re drilled altima rotors so I can stay 4x100 on all 4 corners.

Why would you want to stay 4x100? Unless you're not wanting to buy wheels. You could probably find some stock 300zx wheels for a decent price.

Why would I go five lug. 300zx wheels are 5x114, altima hubs(which is what the conversion was done with)are 4x114.

Ah I see, I wasn't even thinking about the Altima bolt pattern.

Actually the conversion was done with b15 steering knuckles and hubs. One guy pressed out the hubs and redrilled them to 4x100. Really the only altima part needed is the master cylinder.