Thread: 92 to 95 p10 tranny difference

My buddy is installing a 92 p10 non lsd trans in his 95 g20. Is their any differences and if so what changes should be performed. Any info would be greatly appreciated.
Thanks

Well I spoke to a few forum members and found out that the 92 bell housing does not have a hole for the crank sensor which the 95 has. You could either drill a hole for the crank sensor or leave the crank sensor out and just have a cel.

Thats it and a non LSD axle for the drivers side

yea, both trannies were non lsd so the axle's should be the same. Thanks