Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: clutch almost new and it's slipping.?

+ Reply To Thread
Posts: 1-8 of 8
2010-02-04 18:27:25
clutch almost new and it's slipping.?
first sorry for my english.

a month ago, I broke the bellhousing transmission. there was a oil leak, and I was driving for 2 hours with low level of gear oil.

I disassemble the transmission, I fix the bellhousing fisure and the oil leak.
Everything was fine, only the fisure and the oil leak.

I bought my clutch 1 year ago, it's a LUK brand and I do not use it for racing, only a few times. I think that it is almost new.

Now, when I installed the transmission, the car feels like if the clutch is slipping.

Before the fisure. The clutch works fine, without slipping.

I think that I was install something wrong, or maybe I broke my transmission.

2010-02-04 18:33:53
Did any fluid contact the clutch surfaces or the pressure plate surface or the flywheel surface?
2010-02-04 19:26:46
is it cable? maybe u adjusted it too much?
2010-02-05 16:33:07
Originally Posted by blueb13
is it cable? maybe u adjusted it too much?

second this...check the clutch cble and see if its adjusted properly
2010-02-06 04:38:17
I already check the clutch cable and still slipping
2010-04-07 17:31:02
Maybe u didn't tighten the pressure plate all the way?
2010-04-07 18:37:30
if you got oil on the clutch disk at all your out of luck on that. Its going to slip. Nothing you can do. You would need a new disk and clean the pp and flywheel up very very good before installing a new disk.
2010-04-07 19:16:22
did you beat on the clutch and did you go througha break in period with it before beating on it
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top