Thread: Will these rims and tires fit?

Ok so I've got a pair of 16" Sportmax 002's with a 0 offset that I'm throwing on the rear of my B14 and a different setup going on up front that I know will be fine. The tires on the sportmax are shot but I have 2, 215-60-16 tires that I can throw on the sportmax and I'm just wondering if I will have any rubbing issues with the wheels and tires sticking out due to the 0 offset and slightly taller tires. I am running Tein S-Techs all the way around and I have my snow tires on right now which are 195/55/15 and they still have about a 2 finger gap in the back. LMK what you think

Thanks

No and NO.

You are pushing the tire out almost 2" from stock add that to a taller tire and its double No.

Well I already know the wheel will fit "it's already been done", I'm just not sure if the tire would fit. Any input on what size tire yall think I could use?

put them on and roollllll your fenders......then take pics tyo show us!!!!!

The CORRECT answer:

A 60 series tire is a bit much. A 50 series tire would be MUCH better, and will clear on a 16x8 Sportmax 002 with 0ET. I personally wouldn't do it, though.

Ok thanks for the input.

215/45 16 would give you a nice stretch look with that size rim but to answer ur question you will rub!

Ok thanks, I also have a set of 16" Kobe Cup-5 rims which have a +40 offset. Would the 215/60R16's fit on the B14 with no issues?

Yessir you should be good with that

Then why are you asking?

Are my calculations incorrect or is my B14 different from the rest?

Stock wheel is 15x6 +40offset
New wheel is 16x8 0offset
This will push the wheel out 65mm more than the stock wheel. How is that going to fit without rubbing? Add a 215/60 on top of that your tire is now 26.1" in diameter and 8.8" wide. From the stock of 23.5" in diameter and a width of 7.9".

It would have to rub and or crunch the fender.



A much better choice.