Thread: PS hose highport intake fitting issue. <PICS>

I'm working on installing a highport head and intake mani on my lowport setup. And I came across this issue today.

I get the intake mani on as far as I can but the, I'm guessing... The TPS and idle adjust is hitting the PS line on top of the pump. And I'm at a stand still. What can I do from here? Do I have to swap over to a highport PS pump now to resolve this issue? Here are some pictures. You can see that I can't get the mani to line up to the studs and where the connections to the TPS are hitting the line.

Enter crappy cell pictures!

anyone?

i just had to use a highport bung thing off the back that connects the line to the pump.

pics?

Can I get some auto part tubing and bend it around to work?

Figured it out...I need a high port motor ps pump. The return line is closer to the tension bracket on the high ports. Low ports are going the other direction which cause this issue.

You can leave the pump and switch out the hose fitting. Hang on, I have pics.

Pics please...

It's kind of hard to see on the highport picture, but essentially that little piece that the hose connects to points in the opposite direction. It's interchangeable from one pump to the other.

Ohh that's awesome.... Did you get them off a junk pump?

Can you send the pics to me

[email]Sentrixx@gmail.com[/email]