Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Wont start when its warm

+ Reply To Thread
Posts: 31-33 of 33
2010-01-20 03:43:03
#31
Originally Posted by itsa2drsentra
just go to the junk yard. it would just be easier that way. go and clip the pigtail for the maf, and grab the two sensors that were mentioned before on the side of the intake manifold.
splice and soldier the wires for the maf CORRECTLY... and blam. you should be golden.

P.S. Greg from G Spec is a good guy if you should want to or need to do business with him.


he should only replace the one sensor, CTS. Replacing the other, 1-wire plug is completely non-crucial. Considering a new CTS is maybe $10, just get a new one and forget the hassle of wondering if your pick-n-pull sensor is even good.
2010-01-20 05:31:02
#32
well i fixed it.. i replaced my HTS and cleaned the pig tail. i still need a pig tail because the clip was broken. thanks for the help everyone
2010-01-20 05:42:46
#33
Originally Posted by D-Unit121
well i fixed it.. i replaced my HTS and cleaned the pig tail. i still need a pig tail because the clip was broken. thanks for the help everyone


by HTS, do you mean CTS?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top