Thread: Swapping a GTiR in my b13

I am Doing a swap of a GTiR motor to a b13 SE-R, does it require any re-wiring or can I just put the motor into my b13 and just plug in the wires accordingly.??


This is my first motor swap and I am kind of nervous but excited at the same time.

Any help or advise will be greatly appreciated.

thanks in advance.
C

get an avenir gti-r's are nothing but headaches atleast from what i have seen.

I answered your pm by the way.

Yo need to put resistors into the injector harness, reverse the wiring to the TPS and the O2 sensor that changes slightly and add the boost solenoid harness.

Also you will need to enlarge the DE flywheel bolt holes in order to use the Pulsar flywheel bolts.

thanks you guys....

Tisk tisk should have bought my turbo setup and a DET long block. But just search the old forum there are plenty of posts on this topic. GL

That's not bad advice at all. I knew a guy with one of those GTi-R engines and he wanted to burn the car every weekend.... nothing but problems. On the other hand if you can get it running right you will reap the benifits.