B15 tranny not lining up with rear mm bracket???
I recently was about to finally mount my B15 tranny(courtesy of the great greg V) on my VE when I got the spline in and started to bolt it up everything it all looked fine until i got to the rear mount mount and the bracket that bolts to the tranny....It wasn't even close! The shifter bar was even rubbing on the front sway bar.
First the tranny is sitting to low and the bolt holes are about 1-2inches away even after jacking them???
My next issue is the tob keeps coming unhitched from the fork its attached to, i am using a old tob , so do i need to b15 TOB or is there something else?
Please help me here guys. I finally have the perfect set-up and really want to drive my car
So anybody that has mounted a b15 tranny did you have these same issues??? If so what was the fix??
thanks
First the tranny is sitting to low and the bolt holes are about 1-2inches away even after jacking them???
My next issue is the tob keeps coming unhitched from the fork its attached to, i am using a old tob , so do i need to b15 TOB or is there something else?
Please help me here guys. I finally have the perfect set-up and really want to drive my car
So anybody that has mounted a b15 tranny did you have these same issues??? If so what was the fix??
thanks