Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Front left drive-shaft Interchangeability?

+ Reply To Thread
Posts: 11-17 of 17
2009-10-22 23:03:10
#11
check for an abs sensor on the caliper
2009-10-23 06:54:39
#12
or a tone wheel on your old axle
2009-10-23 16:06:47
#13
my 200sx se-r doesn't have ABS :O :O :O

I always believe that my 200sx had ABS, hahahaah.

thanks anyway. tomorrow I'm gonna go to the junkyard.
2009-10-24 18:04:59
#14
you can take your axle off an have it rebuilt
2009-10-25 07:10:56
#15
You can also check your master cylinder. If it has four lines coming out of it, then you dont have abs, if it has two lines coming out then you DO have abs.
2009-10-25 07:13:21
#16
Originally Posted by 91grayDET
ya if the tranny it came out of is an LSD...


so to recap LSD axles will only fit LSD tranny's, non-LSD axles will only fit non-LSD tranny's...
only difference is the ABS tone wheel.

And even if you have a non abs LSD tranny you can still use a LSD ABS axle...but not the other way around


No, you only have to match the drivers side (left side) axle with the transmission (lsd or non lsd). The passenger side axle is the same between lsd and non lsd.
2009-10-25 12:45:46
#17
Originally Posted by jer_760
No, you only have to match the drivers side (left side) axle with the transmission (lsd or non lsd). The passenger side axle is the same between lsd and non lsd.


ah yes i couldn't remember which side was the one that was interchangeable...
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top