Thread: Remember me? (Spark plug covers)

A few years ago, I was going to make Billet Aluminum covers for the SR20. I had a prototype made, it wasn't an exact fit, but it looked like this:


Since then, I dropped the ball. I was digging through some old things and I found the old prototype, I have several machine shops I know very well who can do mass production very easily. I was thinking of making around 10 or 20 and see how it goes.

The top side would have a nice "SR20" engraved to the right of the bolt. I'll also make sure I have all hardware included. The downside is I can only do Roller Rocker and VVL valve covers, unless someone is willing to donate some time for me to measure and test fit.

Is anybody in?

For the record, the bolt is going to be flush with the top.

OEM is making them, IMO u would be waisting your time...

OEM is a member or you mean Nissan is making them?

Edit: Ahh, I see now. I still think I may do a few.

OEM = Overkill Engineering Motorsports. Forum Vendor.

cost?

Don't forget these:

http://www.sr20-forum.com/general-sr20/21392-rr-vc-plug-cover.html

doesnt look bad, but there are alot of other ppl/vedors that are making them, so you wouldh vae ot bring soemthing better or different to the table to get ppls attention