Thread: Flush Mount Velocity Stacks Or Intergrated Velocit Stacks

I want to know if any of you guys know and companies that make intergrated velocity stacks - ( Flush mount velocity stacks ) so I can make an intake manifold.


Example would be the type of velocity stack setup that comes in the O2 Induction manifold.


I am looking for one that sitts on a 1/2 inch plate that is 15.5-16 inches long by 4 inches tall. This means the bell mouth would be about 4in round on the OD.

Or I am looking for the same plate being used in the O2 induction manifold.

I have tried contacting the guy from O2 inductions about making a manifold for me but as of Jan he has not been willing to make one for me so I want to make one for myself as I did the first time.

Thanks for any help.

Ross

http://www.sr20-forum.com/vvl/15992-oh-hello-dar.html

I have that already. I am looking for someone who makes a plate style one.

The Ross velocity stacks are a little to small for me.

I need one with the opening of the bell at around 4 inches.

The ones in the O2 induction manifold are perfect. Just need to know where he is getting them made.

dude whats the deal with the tranny bracket?

There is a Post about tranny brackets.

At the beggining of the thread there is a list of whos tranny brackets have been shipped. This has been the same for everyone else. Your tranny bracket shipped on Sep 9th



Now your tranny bracket and NI SER-1 tranny bracket were paid for around the same time Sept 6th. He got his on Sat Sept 12th. He lives in New Jersey, You live in Guam.

Now You payment ( E Check ) was sent via Paypal on Sep 3rd to me. Your payment ( E Check ) was on hold and cleared on Sept 9th last Wed. I shipped out your bracket on Sep 9th with NI SER-1 tranny bracket.

NI SER-1 lives 1,100 miles away. He got his on Sep 12th.

MATTB you live 9300 miles from Cali so I am sure it will take alittle longer as they said at USPS it would take 6 - 9 days and that part was shipped Priority Mail.


Now MATTB, I have not done anything diffrent when sending out your tranny bracket, I sent it out in a timely fashion, I posted that I shipped it out on the tranny bracket thread, just like everyone elses.

No sure what the problem is. All you had to do is check the tranny bracket thread like everyone else has.

I hope know you dont make this into anything more than it is.

Does this help at all?
Metal Spinning, Bellmouth, Wheel Shrouds, Inlet Cone, Spun Metal - AMS Industries Ltd.

Also I know you're familiar with this shop. They do custom work too. Maybe prices are reasonable?
http://www.xcessivemanufacturing.com/merchant.ihtml?pid=136&step=4

Ross Machine Racing would be my first choice, but 3" is the largest they seem to have.
http://www.rossmachineracing.com/225vstack.html

My mistake, its just that had pm'd you and didnt get a reply.

I checked the thread but not on the 1st page(which had the updated list).

No problems here, just wanted to see an update but didnt look in the right place.:o

you can build an entire set up from ross parts on their website.

big or small