Thread: B15 SR20: Rod knock?

good choice, now you got 2 options

convert to b14 ecu
make TB adapter to mount b15 TB on VE ITM

You may want to get started on that part

Ok, so since I have zero resources to make an adapter plate for the TB, how hard is it to convert the ECU?

i think krash did a whole how-to on that. Just check out the jgy site as the whole pinout chart is there for b15 to b14.

Sweet, thanks. We'll have some time to get it swapped over, since my bro doesn't really have a job at the moment. The car is going to sit for a while.

I tried to find this and am having trouble.
Please tell me the user name to search under, Krash doesn't seem to be recognized

B15 Swap Wiring Question (IACV-AAC) - SR20 Forum

JGYCustoms.com - Wiring a B14 ECU to run a B15 car

Get OBD-II port to work with B14/B15 ECU swap - B15sentra.net - Nissan Sentra Forum

Thanks !!!

Or you can get a machine shop to fab something up for the tb.

Probably cost like $20. You just give them the VE TB and the B15 TB and they'll do the rest. I have a local aluminum scrap place that I picked up a few pieces of aluminum (12"x18") for like $3.

I had a good friend drill it out for me and was done. Take some paper gaskets and make your own, and you're done.

So easy, a caveman can do it.

Or...I could sell/trade you mine to get you started...I probably won't be needing it soon.

It has a slight air leak, but some RTV or thicker gasket could solve that.