Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Steering wheel vibration under acceleration!!!

+ Reply To Thread
Posts: 41-50 of 81
2009-07-26 04:09:59
#41
Originally Posted by TheRealNighthog
And if it isnt Im coming to your house to steal the tranny..


haha, you might as well do it tonight cuz the car is up on jack stands so it makes it easier for ya

Originally Posted by Teal97
so here's to the tranny (gulp). i hope this is the REAL fix!
if it is, i'm gonna go shake my old mechanics hand REAL TIGHT, just for knowing his sheeeit!

Good Luck,


dude i am $****ting bricks hoping this is the cure to my problem. the tranny is in. all i have to do now is modify the linkage that goes to the rear motor mount and install the axles and fill the tranny. i should be done tomorrow and while i am down there i might as well put it my ssautocrap header.
2009-07-26 04:18:41
#42
you changed your motor mounts right?
2009-07-26 05:04:35
#43
Originally Posted by ahab91nx
you changed your motor mounts right?


no, i have prothanes in there and i checked all of them. they are all in tact and while i was down there today i made sure all bolts where tight and where they were suppose to be.
2009-07-26 05:06:59
#44
prothanes ftw! hopefully this trans works...perhaps things were loose in there
2009-07-26 05:26:15
#45
Originally Posted by ahab91nx
prothanes ftw! hopefully this trans works...perhaps things were loose in there


i hope for the exact same thing!
2009-07-26 13:29:34
#46
I have a light steering vibration but its because my tires are crap...but you said you replaced wheel bearings(causing my rear right to vibrate) tie rods bj and everything....i mean if worse comes to worse maybe one of the axles you put in was bent...im stumped
2009-07-26 14:30:45
#47
Originally Posted by ahab91nx
I have a light steering vibration but its because my tires are crap...but you said you replaced wheel bearings(causing my rear right to vibrate) tie rods bj and everything....i mean if worse comes to worse maybe one of the axles you put in was bent...im stumped


after three sets of axles, i just doubt i can get three sets that are defective in a row.
2009-07-26 19:32:47
#48
thats an easy one to rule out then...
2009-07-27 02:01:16
#49
well, my suspicion was correct and im not mad that i replaced everything because now everything is new.

i just gotta bend the shift linkage some more for smoother shifting but NO MORE VIBRATION UNDER ACCELORATION!!! PROBLEM SOLVED HALLELUJAH

so Teal97 your mechanic was right and i knew there could be nothing else it could be. tomorrow i will be getting another alignment to make sure everything is spot on.
2009-07-27 02:05:06
#50
fuh real...the trans....wow...how much did you pay again for the b15?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top