Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Enkei RPF1 15x7 +41mm on NX Fitment?

+ Reply To Thread
Posts: 1-7 of 7
2009-07-08 17:47:09
#1
Enkei RPF1 15x7 +41mm on NX Fitment?
I am deciding on buying the 9.5lbs Enkei RPF1 with 41mm offset for my NX. Does anyone has any pictures of those wheels fiting an NX?
Any issues with the back rubbing the agx+RM combo?

It's a good price although I wish they were 35mm offset, let me know your thoughts.

Thanks.
2009-07-08 18:30:46
#2
I had a set of 40 offset on my nx for a small time.
It rubbed under real hard cornering,not even enpugh to hurt the tire,but enough to remove paint off the strut.
I believe the 41 offset will work with a 5mm spacer.
I have run +35 with 205/50-15 azenis no problem.
2009-07-08 19:09:31
#3
Get the +35 offset, they fit much better. I have them on my '91 SE-R and they still weigh less than 10 lbs. My car is lowered about an inch, with Progress coil overs and I have no fitment problems.

Mark
2009-07-08 22:26:55
#4
I also have +35 15x7's on my b13 sitting on kyb/GC setup. no fitment issues.

Get the +35 its worth the extra money.

[img][IMG]http://i155.photobucket.com/albums/s285/Savage13_photos/100_5362.jpg[/img][/IMG]
2009-07-08 22:46:29
#5
+1 on going ET35 instead!!!
2009-07-09 00:33:46
#6
Thanks for your suggestions, I wish that deal was with the 35mm offset wheels so I wouldn't be faced with this hard decision.
The tires are 4-heat cycled Hankooks R-compound (C51) and the price for the combo is about what I would pay for the wheels themselves.
2009-07-09 00:52:03
#7
those are local to me.. I know the seller... he used them on a honda or acura IIRC (which needs the higher offset) and not on a sentra.

Ironic there was just another set that sold last week from Indiana for $600.. lol also the ET41....



I'd hold off and get/find ET35.. I would gotten them locally already if they were ET35 ..and I've bought from him before!
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top