Originally Posted by dphillipsB13 
The crossmember that runs under the motor, from the subframe to the front of the car. That was my problem when my motor bucked. The 4 bolts that attach the crossmmber have rubber spacers on them. I replaced them with washers to compensate for the slack the rubber had.
The motor is SOLID now!
I used 4 5/8" washers per bolt, so 16 washers total.
2between the bolt and the crossmember and 2 between the crossmember and the car.
Try it out.
I did the same thing
Be the first to like this post.
Back to top
