Thread: I need some help guys....

My build VE-T motor just need some parts to be done... but the big missing here its the head gasket WHO can help me here to get the VET HG??
Thanks very much for reading.

Do you need a VET head gasket, or a VE head gasket? (Are they even different?)

Vet Ben ... the VET head gasket its metalic the "normal" no.
thanks.

So the passages and everything are the same? In that case, you could get a Cosworth head gasket.
Greg V would be my first stop as far as trying to get an OEM VET head gasket. What country are you in?

At least from what I know the Cosworth head gasket its not matched for the VE head...maybe they have a new desing?
Greg V do not have the VET head gasket now .
Chile.

Mike Kojima says in a few posts here that the Cosworth gasket will work for the VE head. That thread is about the 90mm bore size gasket. Not sure if that carries over to the 87mm bore gasket, but I would make a call to Cosworth.

Apparently Mazworx makes one for the VE.

Edit: Okay, it looks like the 87mm Cosworth HG doesn't work on a VE head.

http://www.sr20-forum.com/vvl/5743-cometic-vs-sr20ve-metal-gasket-2.html#post85735

Back in march Mazworx said they had stock VET gaskets available as well.

http://www.sr20-forum.com/vvl/5743-cometic-vs-sr20ve-metal-gasket-3.html#post212525

Cosworth do not work ... the Power enterprise that mazworx sales are only 90mm I need a standard bore size HG ... so there are only 2 options for the turbo guys stock VE and cometic.I will send a mail to mazworx to see if they got a VET gasket.
Thanks again.