You would have to call them. It seems they have all 3 rotors.
the 1.6 which should be a 240mm rotor
the stock se-r which is a 250mm
nx2000 rotor which is a 257mm
If you have stock se-r brakes you want the 250mm rotor.
Originally Posted by
Nismo_sr20 I'm going to Iowa from northwest Washington. Crossing 3 mountains ranges at least!!! What else are you doing to get your car ready, Vex? My car runs really well I'm not sure if i need to do too much...
Im VERY paranoid about my car. Anything and everything that you do in a tune up is what I do before my Texas trips.
Distributor Cap+Rotor
Coolant system flush and system bleeding. Although this time I dont need to because I just did it about 2 months ago when I got my NX2000 radiator.
Change spark plugs and I keep a spare set in my car.
Change oil, oil filter, drain plug washer. Check for any leaks.
Cleaning and reoiling my JWT Pop charger filter.
Changing fuel filter this time.
My tranny fluid is about 2 months old with Redline MT-90 so I dont need to worry about that.
Change PCV valve
Cleaning the throttle body and intake manifold (better gas mileage!!!)
Checking brake fluid, pads and rotors (everything is about a month old)
Filling my nitrous bottle
Check all your suspension components, nuts, bolts, lug nuts, making sure they are all tight.