Thread: nx/b13 injector diagram needed

I just installed my resistors and wanted to make sure i have the wires long enough to go to their correct locations.
I have a 93 nissan nx if the year matters. Any help would be greatly appreciated.

Thanks,Jon

bueller? Anyone?

did you install resistors for an injector change if soo you just put them inline with the power wire going into the injectors. Your post is kinda confusing as to what your wanting to do.

They are inline resistors so to speak but i have them mounted on a plate high up on the firewall. I just need to know which wire is for which injector so i can be sure i have the wires long enough. EX blue with yellow stripe is for injector 1 etc...

yeah the wires on the injectors that are the same color are the main positive feed for the injectors, the ones that are different color or stripe for each injector is the ground going to the ecu. So you can put it on either side it does not matter.

Thats what i thought but wasnt sure, i havent had to use resistors in a few years.

I mainly want to know so the right injector is spraying in the right cyl. at the correct time.

inj #1 power is w/b ground is w
inj#2 power is y/b ground is w
inj#3 power is g/b " "
inj$4 power is l/b " "

this is from my 92 fsm and my 94 fsm so i would imagine the 93 year model being the same.

Cool thanks, i will check it out in a bit and see if the wire colors match.