These 2 are 50A or non-lsd, they also look like they've been there for ever. Most fwd SR20 guys don't go for these because of the hydro clutch, different trans mount, and different axles that it has.
Originally Posted by Sealti96 These 2 are 50A or non-lsd, they also look like they've been there for ever. Most fwd SR20 guys don't go for these because of the hydro clutch, different trans mount, and different axles that it has.
I hear you on that but I have a P11 G20t that im about to make 5 speed.
I got this one that I converted to top motor mount to make swap easier if you like. FYI if you use these trannys you will need to use axles from 93-97 altima due to the bigger input shaft on the tranny side of the axles. P11 and U13 spindal side of the axles are the same
Originally Posted by SR20PWRDALTY I got this one that I converted to top motor mount to make swap easier if you like. FYI if you use these trannys you will need to use axles from 93-97 altima due to the bigger input shaft on the tranny side of the axles. P11 and U13 spindal side of the axles are the same
What did you end up doing buying a Nissan Maxima rear half case brand new? What are you asking for that tranny? Was it a direct swap of the casing?