Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Any good aftermarket NX radiators??

+ Reply To Thread
Posts: 41-50 of 65
2009-07-07 18:51:34
#41
I dont have any first hand experience with the p11. But you could easily just measure the tickness of the core and see it its one of the thicker ones.
2009-07-07 20:55:46
#42
any reason you decided to negate the koyo rads?
2009-07-07 21:04:50
#43
i love my koyo

2009-07-07 21:18:16
#44
Originally Posted by GT2871RBLUBIRD
any reason you decided to negate the koyo rads?


price
2009-07-07 21:21:46
#45
Originally Posted by eggman
price


You can find them for around 300
2009-07-07 21:26:32
#46
^^^like I said...I think the OP wants a 100-150 dollar solution.
But by all means if you can afford the koyo...hell yes
2009-07-07 23:07:24
#47
Originally Posted by eggman
^^^like I said...I think the OP wants a 100-150 dollar solution.
But by all means if you can afford the koyo...hell yes


Yes, I want a cheaper solution and a 'thinner' solution. I've seen the amount of space in some B14's with a Koyo and there isn't much room left. I want to keep my A/C and have room to work. I think the Koyo is overkill for most applications. Ferrari4a ran his turbo car daily on a stock, I believe it was, 1.6L radiator in his 200sx which is I think even smaller than or same size as the 2.0L 200sx radiator with an SR20de+t and never really had overheating issues.

So I think a larger P10 or NX sized radiator will do the trick for a turbo street car with some good fans if needed.

I think a Koyo is only really needed for track cars or unique setups.
2009-07-07 23:10:48
#48
Originally Posted by GT2871RBLUBIRD
any reason you decided to negate the koyo rads?



If your talking about me, the only reason i didnt mention them is because we all know they are the nicest thing for our cars and cost between 300-325 shipped. Also there really isnt any confusion about them, they are the best hands down. Even if its hard to get the "correct" inlet and outlet size.

I have found a few all alum radiators through summit racing that will fit where the a/c condenser was from the factory in an nx. The most expensive one i found that will work for this is like $270.00. I really didnt mention these either because you would have to change the inlet and outlet sizes on them and run a surge tank instead of the traditional cap on the top of the radiator. There also are a few other small mods you would have to do to make them fit nicely. But in my case i will have alot of extra space in front of the turbo.

I dont have the summit one yet. I am running a stock ga16 b14 auto one with adapters. Its the ticker nx style one with the built in trans cooler and smaller inlet and outlets. Once i have enough money i will be going with one of the summit ones i mentioned, i will do a comparisson and write up at that time. It wont be a bolt in and go solution like the koyo, but will be great for people with an nx that want to run a large turbo set up.
2009-07-07 23:11:53
#49
Also my junkyard one was $35.00+5.00 for radiator hose adapters.
2009-07-08 13:04:17
#50
Originally Posted by Benito
P10 is 1991-1996 91-93.5 are highports. 94-96 are lowports.

P11 is 99-02


^Dang I knew that, I was typing to fast lol. I did have lowport highport in my head hahaha. Its the B13 in me
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top