Thread: resistors

Ok, Here's a pic of the resistors I have.

The one on the left is out of a u13 harness that came with my motor
The one on the right is out of my b14 harness.

Question is can I wire the det resistor into my b14 harness?

Concerns:
1)det is external coil vs. internal on de
2)do the coils run on the same voltage?
3)would it just be easier to find a de resistor somewhere?
4)The det resistor has four prongs on it. One side of it is the resistor I'm guessing and the other side is...?? I don't know what the symbol means on it.

I also noticed that the de resistor on the right looks as if it used to say 2.2 something above the resistor symbol, which matches the 2.2 on the det resistor.





A pic of the casing that the det resistor was in.

The symbol is a 22uF Capacitor. Not sure which will work. I would try to find another B14 one though.

Is it possible to wire only the resistor side and not the capacitor side? I have the piece of harness for it so I could connect only the two wires to the resistor.