Thread: Dyno Next Week - What to Test?

I'm going to the dyno this Saturday to dyno and tune. I'm planning on dyno testing couple different things while I'm at it

Alright so here is the current agenda...

Baseline
3 pulls base numbers to see what I currently have, warming up the car so that other numbers don't appear too high for the first pulls.

Spark Plug Testing
1 Pull Spark Plugs Not Indexed
1 Pull Spark Plugs Indexed
1 Pull Spark Plugs Indexed and Gaped

I'm planning on going out and picking up two sets of BKR6E's brand new from Napa, now I am running 7E's but I don't need two more sets of 7E's and I can use 6E's in my wife's car

Flow stack Testing - No Filters!
1 Pull with no flow stacks or filters "Open MAF"
1 Pull with JWT Pop Charger
1 Pull with BPi Flow Stack

3bar vs 4bar
Seeing if there is actually power to gain just from switching

The reason I say no filters, because I don't have a regular cone filter, thus to make it fair no filters for all of the above.

If you have any suggestions for what else I can dyno let me know

how much psi are you going to be getting tuned on? or is that the suprise?

Nope no secret, planning on running 9psi (stock W11 boost).

Full mod list that I'm planning on having while at the dyno.

• Avenir W11 (9 PSI)
• 370CC Injectors 4Bar
• 93 Shell Gas
• E60 MAF
• Thermoblok Spacers
• 2.5" Exhaust to 2.5" STI muffler, no CAT
• UR Pulleys - 2 Piece
• BKR7E's Indexed and Side Gaped
• BPi Flow Stack
• Calum Real Time ECU
• Tuning to 12:1 at WOT
  

V,

I wouldn't think you would see any change in numbers, since you're boosted? (comparing BPi to JWT or whatever filters, pre turbo)

I'm thinking it might not make a difference boosted for flow stacks, but I'm here to prove it to myself and to everyone else haha. Plus if BPi Flow stack shows good numbers, Brian will give me the money back

hope to get results on the indexing and bpi flowstack.... good luck at the dyno my friend...

Thanks , I want to then compare the results to the electronic devices that I have

Hope you got a deal on the dyno session. =]

$100 for 1-2 hours depending on how nice they will be

Update, gonna try do to do some 3bar vs 4 bar runs and see if that lone gives any power.