Thread: Wheel bearing replacement

Give this a check out..

http://www.sr20-forum.com/general-sr20/18658-wheel-hub-bearing-replacement-options.html

On like the 2nd or 3rd page or something I made a list of all the parts too.

If you are looking for a whole assy (it really is the best way unless you've got a spare or a press) ask for the knuckle/hub assembly. Knuckle is the heavy steel part bolted to car and hub is the cylindrical part which the axle goes through that is held into the knuckle by the wheel bearing.

Thanks Danja for the link, I was just looking at that thread.
Yeah I'm going to try and find a knuckle/hub assembly. Got to find one from a abs car though, I have a feeling this won't be an easy find.

If your ABS doesn't work don't bother, you don't need to then. My abs is long gone so it was easy =D But if yours works then yea it'll be harder lol.

Yeah my abs still works.
Will a knuckle and hub assembly from a 95-99 Sentra work as well?

Will a knuckle/hub assembly from a b13 work on my b14?

that's what I'm trying to find out too..

Yes

front suspension components are basically identical. Wheel hub/knuckle, control arm, shock.. all the same

Now are just the front knuckle/hub/wheel bearing the same.. are the rears different??

I know the rear B14 has a beam suspension, and the B13 is independent, but didn't know about the knuckle and hub..

I will not comment on that because I don't know. Front = you're good

rear I have no idea