Thread: Bumper Sag Fix ?

Is there any way to fix the front and rear bumper sag on B14s ?
I was told that only the clips need replacing. Is that true ?

Subscribed, my rear has been saggin baggin barry for far too long.

Seriously! I have it on the whole back pumper like 1/4" and on the passenger side front like 1/2"

Looks like a common problem. It gets annoying when you finish detailing your car and then you see the dreaded sag, haha.

My bumpers sag like my balls do, the left side drops a little lower than the right...I just couldn't resist!

Welcome to the world of Econobox cars

Uhh my back sags but I don't think that's fixable, just poor design. As for the front, take a look at your bumper holders, I'm going to put couple screws in to hold the bumper haha

yup got it to hhaa

I wonder if someones bumper sag has gotten to the point where it fell off while driving. That's my worst nightmare, especially on the freeway -_-

My front bumper was sagging. I ghetto fixed it by drilling a small hole in a piece of plywood and wedging it between the front bumper (the part where it was sagging). Then I ran a ziptie through the hole and tied it to the head lamp bracket. It somewhat bent the bumper back up after a while. I took out the piece of plywood and the bumper kept it shape. It will probably start to sag again though.

That happened to me... on a freeway but I was driving a A2 Jetta....