Thread: My sr20 blacktop rebuild specs

Hey guys im a newbie to the site so nice 2 meet u all,

anyways im currently in the process of rebuilding my sr20 and i just wanna run it by u guys to find out *** u guys think. Feel free to inform me to add/remove parts or recommend me anything

Cp pistons (20 thou over)
Eagle H beam rods
Tomei 1.2mm headgasket
ARP studs all round (main,head etc)
Tomei procam 270/270 12.00mm lift camshafts
Tomei solid pivot set
Tomei adjustable cam gears
Brian Crower valve springs + retainers OR Tomei Type A (unsure if i should go dual valve springs or stay with single and whether i shud go tomei or BC)
The usual machining balancing etc is all being done, the head is going to be ported and polished aswell

anyways all in all im thinking of putting either a Garrett gt35R or a trust t67 turbo on it to make a safe 400hp and on high boost 450-500hp

I did the solid lifter conversion in the hope of a much higher redline, i was hoping for 8.5k-9k redline, do you guys think i will get this?

Please let me know what u think of the parts im using and whether or not i should change any of them or add anything.

thanks in advance

no comments lol?