Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: who has an safc ina b13...

+ Reply To Thread
Posts: 1-9 of 9
2009-01-19 02:23:33
#1
who has an safc ina b13...
im going to be insatlling my safc2 soon. i have taps and splices ready to go too. my question is whos has it in a b13? and exactly what wireing diagram do i use....do i use the na-3 one? and where can i find a ecu pinout with diagram of the wire color and location?

i cant wait to hook this up since i just got my bc stage 2s broken in and the **** PUUUULLLLLSSSSSS like mad....
2009-01-19 02:30:31
#2
i would use this correct?


does anyone have an ORIGINAL safc2 owners manual?
2009-01-22 01:50:46
#3
This is the Apexi device that replaces your speedo/tach correct?
2009-01-22 21:35:19
#4
Originally Posted by Nismo_34
This is the Apexi device that replaces your speedo/tach correct?


no a tuning tool....a piggyback controller
2009-01-22 23:29:37
#5
i have the owners manual for an SAFC 1....would that work? http://www.xspeed.com.au/manuals/Apexi_S-AFC_manual.pdf
2009-01-22 23:57:24
#6
I recently installed an SAFC 2 on my b13 and that's the pinout I used . I just counted and then spliced into the wire i got to. I can't remember which, but you have to use the yellow and white wire on the afc for you MAF signal, one is in and the other is out and if it's not hooked up right the car goes into limp mode and won't rev past 3k. ask me how I know.

I've been a little under the weather, so I'll look up more info tomorrow if you still need it.
2009-01-23 01:40:43
#7
Originally Posted by MN_SR20
I recently installed an SAFC 2 on my b13 and that's the pinout I used . I just counted and then spliced into the wire i got to. I can't remember which, but you have to use the yellow and white wire on the afc for you MAF signal, one is in and the other is out and if it's not hooked up right the car goes into limp mode and won't rev past 3k. ask me how I know.

I've been a little under the weather, so I'll look up more info tomorrow if you still need it.


good to here dude...now i have to get enought nerve to start cutting and splicing wire

how did most of you guys splice the wires? i got tap splices that should work and could be removed if needed. and for the MAF wires i got male n female connectors for the MAF in and out wires
2009-01-26 00:21:08
#8
forgot i posted here. I first used the tap splices but i didn't trust it getting a good connection so i soldered everything and used that liquid electrical tape and then wrapped in with regular tape when it dried. you'll have to guess on which is in and out for the MAF because it's too damn cold outside to go look lol.
2009-01-26 02:11:45
#9
Originally Posted by MN_SR20
forgot i posted here. I first used the tap splices but i didn't trust it getting a good connection so i soldered everything and used that liquid electrical tape and then wrapped in with regular tape when it dried. you'll have to guess on which is in and out for the MAF because it's too damn cold outside to go look lol.


i here ya its freezing here but im not gonna guess on wires until ive TRIPLE checked my connections are correct....
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top