Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Belts, think i got the wrong one. part #s?

+ Reply To Thread
Posts: 1-6 of 6
2008-10-25 17:40:53
#1
Belts, think i got the wrong one. part #s?
Ok, i ordered some parts from everything G20, and before i call to complain i wanna see if myabe i made the mistake in ordering.

I deleted the Ac from my project p10. so after reading around i found that "i should just order the belt from a 2.0 sentra with no ac" thats what i did but the belt is not as wide and there is no way i could get it around the crank pulley and the alternator. i think they sent me the belt from a sentra with no powersteering. are all a/c alt belts the same width regarless of chasis and year? are all powersteering/water pump belts the same width?

anyone know part #'s of the 4 belts in question:
1 sentra without power steering
2 sentra with power steering
3 sentra with a/c
4 sentra without a/c

i am assuming also that the belts are the same if its a highport its in both p10 and b13, and the same for lowports in both later p10s and b14, and then rr in p11 and b15

it might be helpful for people down the road who wanna pull out the a/c or powersteering.
2008-10-26 16:52:55
#2
ps delete with stock pullies = 245k3 or 250k3 (i can't remember, but it's one of those two)
A/C delete = 325k6 (the se-r without a/c had a slimmer belt. it's a 330k4 and they appearantly don't make a 330k6 at the places that I've looked. I just always use the 325k6. It's a half inch shorter, but 6-rib and works. all you really have to do to get it on is fit it around the crank, get as much on the alt as you can, and turn over the engine just a bump. that'll jump the belt onto the alt track.)
2008-10-26 23:16:21
#3
http://www.sr20-forum.com/general-sr20/1140-common-parts-list-w-s.html
2008-10-28 01:32:14
#4
well i looked through a few of the links on the part # list and got the numbers and made a few calls, but noone has the belt. Napa cante get a 6 groove belt less than 36 inches, Advance can only get 38. should i try calling the manufacturers directly? where do all you turbo track guys get your belts? i know you dont have A/C in your drag cars. Do you guys have idler pulleys?
2008-10-28 01:47:48
#5
Here's the belt from Napa:



It's a four rib, which is fine for just the alternator.
2009-01-16 02:54:46
#6
deleted
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top