Thread: installing cams

i've just put my head on my new block (had a rod through the block)

so when the motor is at TDC the dowell pin on the intake cam is at 10 o'clock and the exhuast is at noon?

where is there a good detailed how to for this
i've never messed with anything internall and i dont wanna **** it up

here ya go http://www.sr20forum.com/technical-information-library/88638-how-install-91-cam-works-all-cams.html

http://www.geocities.com/n_dahi/cams/cams.htm

^PICS.

That sounds about right. intake at 10 exhaust at 12 , crank at TDC.


http://www.roastedpavement.com/assemble2.htm

^D*man that motor clean in that link. I'm gonna read that later when I get home.

i may in fact be going insane

ok i got my timing right

but car won't start, weird thing is i seem to be missing some plugs on my harness that i'm pretty sure were on the harness before, like my coolant fan switch (the one next to the temp sensor)
and the iacv red plug

i pulled the harness out twice and checked it over, stuff is missing
and i am insane

i think