Thread: Name these plugs!

94 highport harness what are these 3 plugs at the end of the harness on the alt side? They're after the water temp sensor and all that stuff. Do i need these? what do they do? plz help!

Hard to tell from pics but here we go:

The one with the yellow looks like the one that connects to your injector harness and the other 2 we need maybe 2 more pics from another angle.

These 3 plugs are about a foot after the injectors and water temp stuff. ive got 2 buddies with 91's and their harnesses dont have these on them, they end at the injector connector and water temp stuff...

It looks like the other two are starter ground and aac valve(not the one that goes on it, but its right on the top near it).

i have thoes plugs hanging.. you dont need them i belive.. i have a 94 4 door did a lowport swap in it and they were left over

Starter grounds to the transmission, not through the harness. I believe jen36 is right. If you don't have a/c, one plug might be for the compressor relay (and as such not needed)

Awesome thats what i wanted to know! I rewired this harness to Katana200sx's specs to use in my 96 se 1.6-->JDM RR!