Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Introduce your Scoob

+ Reply To Thread
Posts: 51-60 of 82
2012-05-22 20:36:49
#51
Originally Posted by Cliff
Man everytime I see CE28's on a scoob it makes me want a set!

Good looking car.


Originally Posted by budsang1
bad ass


Thanks!

CE28 were my dream wheels, came across this set for sale for a great price in Chicago this past winter that I couldn't pass up.
2012-05-23 16:15:44
#52
If I find a set of TE37's with the correct width that won't cost me a mint I will snag them.
2012-05-24 17:08:08
#53
Originally Posted by TUNED200
If I find a set of TE37's with the correct width that won't cost me a mint I will snag them.


TE37s will look great on your fozzy. Hope you find some.
2012-05-24 17:27:28
#54
My Suby is sitting on jack stands in the garage while I pile parts , It started as a 03 bugeye in need of lots of help , and it will end up with alot of STI under it , everthing from a STI steering rack to brakes to a 6spd swap , it is really more STI then bugeye at this point ...but I am parts horder , if a little work is good, allot should be great , I just have to pick a damn color to paint it ...
2012-06-04 14:04:41
#55
Bump for more Scoobies!
2012-06-10 16:15:28
#56
Had a little fun in Tate's Hell this past weekend in Florida.

2012-06-10 16:21:15
#57
very cool.
2012-06-10 17:15:18
#58
Originally Posted by jethro
Hello everyone. Well there are quite a bit more suby's on here than I thought. Nice rides! And true, not a fan of Subaru forums, the SR20 ones set the bar too high.

Anyway, miight as well throw a couple pics of mine up as well.







Modifications:
JDM STi Recaro seats
JDM Foglights

RaceComp Engineering Black springs (spring rates of 285/268 and lowers car 15mm/10mm)
Ohlins Fixed Perch adjustable struts
Whiteline 27mm front/24mm rear swaybars
Kartboy endlinks
Group N strut top mounts
Whiteline Steering Rack bushings
STi FHI Titanium front strut tower bar
S204 Yamaha front lower chassis damper
S204 Yamaha rear chassis damper (soon to be installed)

ACT HDSS clutch
Gruppe S lightened flywheel
Group N engine, transmission and pitch mounts
Kartboy Klunk Killer (comfort version)
Whiteline shifter bushings

Hawk HPS pads
DBA 4000 rotors front and rear
Stainless Steel brakelines

APS 3" TBE, Agency Power catless downpipe
Tomei Equal Length Headers and uppipe
Walbro 255 fuel pump
HOA electronic boost control solenoid
Open Source Tune
Ported wastegate on stock VF39
Koyo Radiator with Samco hoses

Volk CE28N (bronze) 18x8.5 +44 on BFGoodrich KDW NT (255/35/18)


nice sti...i think ive seent this in person somewhere around here..i liove in hoffman estates..
2012-06-10 17:36:19
#59
Nice. Those seats would look great in my B14...lol.

EVO 3D
2012-06-10 18:27:26
#60
Lots of good scooby stuff in this thread!

At the Ohio convention I had a chance to run the 08 STi at the drag strip. Only made 3 passes but had some fun.

Car went:
1.74 60'
13.04 et
105.5 MPH

The STi is not as good as the WRX at the drag strip. The 5 speed trans. and gear ratio's are better suited in the WRX.

I had to short shift the STi to keep it at torque peak and that gained a little over a tenth. I did have fun cutting 1.7 60's with my first time at the drag strip with this car.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top