Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Cars spotted, garage pics, driveway pics, misc pics of random car work.

+ Reply To Thread
Posts: 61-70 of 223
2010-09-22 19:56:55
#61
*continued from previous post*

Facebook album permalink (in case the images don't show up in the future).


The 530i was next. Again, totally stock (manual transmission). I think they are rated at 235 HP. BMWs don't like dynos because the traction control and stability needs to be turned off but the stability control sometimes can't be turned off completely. Also the ABS system freaks the fuck out if the rear tires spin too much compared to the fronts. All sorts of engine codes usually pop up unless you can put the ECU in "dyno" mode. Don't tell the owner! =D


I love the Style 32 wheels. The body color is really nice too.












The BMW put down around 195 WHP which seemed a little low to me and the rest of us. I noticed the car took for ever to complete the pull so I checked what gear he was dynoing in and what weight was put in the dyno software for the car (to apply load). They were doing it in 5th gear and the weight was 4,200 lbs. Apparently the car owner asked for 5th gear and he said it weighed 4,200 lbs. I was like "Ummm, let's check that. I think it's more like 3,500 or so."
We looked it up online and that's about what they weigh so we changed that and I told him to have it done in 4th gear. After that he was at 210 WHP which is way more in line with what he should expect anyway.

It was time for the Camaro.








The Camaro was the last car. He started out making 270 WHP I believe and after some tuning with fuel ended up at 300 WHP or there-abouts from the LT1. He has an exhaust on there, maybe a cam. I don't remember. That's still pretty impressive for an LT1 with minor mods. He makes about the same power as me, so I challenged him to a drag race. That hasn't happened yet but my guess is I will destroy him. =/


Cheers!
Last edited by BenFenner on 2013-02-24 at 15-45-04.
2010-09-22 20:14:11
#62
This message is eh, a Fan-banner for Ben Fenner! whoo!
2010-09-22 21:27:40
#63
Might as well post up my new garage in here too.



Yup it's messy, I just moved in, so need shelves.


2010-09-22 21:37:01
#64
New garage looks nice Vadim! Looks like you'll have plenty of room to have fun with some projects! Definitely need the shelving lol
2010-09-22 22:06:33
#65
That's a baller garage Vadim! Much potential!
2010-09-22 23:44:30
#66
Gotta get that sucker organized before I can start working on the G20. But the place is definitely balling, and crawling full of spiders
2010-09-23 00:26:27
#67
def ba nice garage but not a fan of spiders! ew
2010-09-23 17:34:58
#68
Originally Posted by BenFenner


The Camaro was the last car. He started out making 270 WHP I believe and after some tuning with fuel ended up at 300 WHP or there-abouts from the LT1. He has an exhaust on there, maybe cams. I don't remember. That's still pretty impressive for an LT1 with minor mods. He makes about the same power as me, so I challenged him to a drag race. That hasn't happened yet but my guess is I will destroy him. =/


Cheers!


LT1 only has one cam....its a push rod motor. A cammed LT1 should put down around 350rwhp, + or - depending on the size of the cam and the supporting bolt ons.
2010-09-23 17:51:39
#69
I knew it had one cam. I'm just so used to typing "cams".
Doh.
Yah I guess it didn't have a better cam based on the numbers.
2010-09-26 15:53:45
#70
Facebook albums permalink 1 and 2 and 3 (in case the images don't show up in the future).

The black S13 with SR20DET got stripped, parted out and scrapped.
The silver S13 was purchased with the plan of a 700+ WHP KA24DE+T (it came with a KA24E).
First thing was to get some wide rubber on there.










After rolling the fenders and fitting the steel wheels Dan decided he needed more wheel/tire.
He picked up some over fenders. 50mm in the back and 40mm up front if I remember correctly (this was a while ago).
He got some cheap 5 spoke alloy wheels and some more rubber. Sorry I don't have the exact details.

The plan is to blend the rear fenders in and get the car painted eventually. Also the front fenders will likely get the ricer holes filled and blended.


















Picked up a KA24DE for $500 off eBay with the MDX.




Z32 transmission is on the way.
Last edited by BenFenner on 2013-02-25 at 20-17-45.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top