Thread: HOW TO: Reground Your MAF (mass air flow sensor)

Sweet, I'm gonna try the Intake Mani from the battery negative terminal and see if it helps

Yeah let me know and help me update that would be great.

Will do, I have so many mods on my mind to improve, but it is sooo hard not to install them all at once! Need to do one at a time to see which one helps with the MPG's

could this work on the ga16 as well? i was assuming that the wires might be different. ill have to double check.

Be careful not to cut the wrong wire, there are 4 wires on a GA. A friend of mine fried his ECU by grounding the wrong wire

ok but which color wire do i have to ground it at. the white 1 correct?

Not exactly sure. I would ask in the general section. Like I mentioned, if you reground the wrong wire you could fry your ECU...

you mean like i can eat my own ecu after i do so?

jk this is going on my things to do.

thnx for the nice write up

Hmmm now that you mention it some chips could be good... esp fried

I did de reground, and cleaned my MAF, and its incredible!!

The improvement in idle stability, throttle response, and fuel economy ( +2.5 mpg ) are notorius.