Thread: How to get adjustement for your clutch cable when you have run out!

This used to be the 97cent clutch cable trick, but due to recent times, I found out that the price has gone up on the brass reducer. (Someone at Home Depot probally read the threads)
The key is to get a 3/4 to 1" copper reducer, a 1" washer and put it on your clutch cable bracket. It will push your cable back and allow more adjustment. I figured this out one day when I got tired of the creeking the clutch bracket made when I slotted it and watched bend while the clutch was depressed.

This what you do:

The reason you need to put a washer behind the reducer is because the brass reducer will start to work it's way into the rubber bushing and you will slowly lose adjustment again.

bgreen needs to look at this, he needs help adjusting his cable.

works great... i used a dremel and basically made a flange so i didnt need a giant washer.