Just Finished Stuffing My P11 with 9" Wide Wheels
Went from 225/45/17 17x7.5 ET40 to 235/45/17 17x9 ET17. Required major fender rolling and pulling, so not an easy drop in option.
Old tires are Cooper RS3-S (on the left), new tires Yakohoma AD08r (right). Even though new tires are only 10mm wider in the section width, AD08's tend to run wider tread width then most tires so in reality these tires are 20mm wider.
225/45/17 on 7.5" with 40mm offset is about the max you can run without hitting the suspension components.
Going with 17mm offset gave enough clearance for 9" wide wheels and might actually fit 255's.
Plus new wheels/tires are no longer rubbing against the body/transmission.
Here is how much they poke out:
After rolling and pulling the fender and fender mounts out.
Old tires are Cooper RS3-S (on the left), new tires Yakohoma AD08r (right). Even though new tires are only 10mm wider in the section width, AD08's tend to run wider tread width then most tires so in reality these tires are 20mm wider.
225/45/17 on 7.5" with 40mm offset is about the max you can run without hitting the suspension components.
Going with 17mm offset gave enough clearance for 9" wide wheels and might actually fit 255's.
Plus new wheels/tires are no longer rubbing against the body/transmission.
Here is how much they poke out:
After rolling and pulling the fender and fender mounts out.
Last edited by Vadim
on 2017-06-17
at 16-19-55.