Thread: P10.. Mad negative camber HELP!

On my sis 92 p10 we replaced the shocks and bushings all the way around. The rear is ok, but front has crazy negative camber. Like /--\ yeah, like that. Any ideas anyone on how to fix this? Camber bolts on the upper arm?? Tried new springs and no change.

Sounds like the bushings are shot in the Upper Control Arms.

Get new arms and it should go away. Unless other parts are damaged. Taking the wheel off and removing the bolt and nut holding the top of the third link to the outer end of the UCA should let you see the bushings. If the sleeve is not in the center, it is damaged and should be replaced.

Replaced both upper control arms and still doing the same..
Also the Lower control arm bushings and Ball joints.
Springs have to much sag???
Bent lower control arm??

Destroyed bearings in the bottom of the 3rd links? Sorry, but it really reads like you put it together wrong.

No, im pretty sure I got everything on there on right.. I saw one side of the bushing coming out on the LCA, FML. Its doing good now, I swapped all the parts with a P11. Sadly the car will be getting sold.

What parts did you swap with a P11? The rear inner LCA of the P11 is vastly different than the P10 LCA.

Just the top links, springs and the arm that goes down, I bought some LCA locally..

Car got T-Boned.. Close thread

.

Pics of the carnage?