Thread: B14 Motor into a P11 Chassis?

I found a pristine 2001 P11 Chassis with no motor and I was thinking of picking it up. The car the motor would come from is a 98 SE-R

What would I need for this swap to work?
What ECU would I use?

ETC....

I searched and couldn't find anything. I forgot so much about SR20s. =(

What year P11?

2001 I'll edit first post.

You'll need a 00+ Intake manifold, harness, and ecu to run a B14 Lowport SR. I have that stuff if you need it.

Engine harness and ECU from the B14?

The only thing you can use from the B14 Lowport is the Longblock. Intakemani/harness/ecu must be from a 00+ P11. There are other ways, but not worth the trouble.