Thread: P10 poly engine mounts

Does any one know if a kit for a B13 will fit a P10 (jdm)? i have searched but found nothing, if not anyone got a listing, part number or link for Poly P10 mounts
Ta

There aren't any poly mounts for the p10. I believe Subba over on g20.net modded some b13 prothanes to fit, but its better if you ask him. Also, g20.net is currently getting some p10 specific poly mounts made, but it will probably be awhile.

^ditto

I ground down a B13 Prothane to fit the crossmember mount nearest the radiator, then filled the void space on other three with 3M Window Weld (urethane in a tube).

You could mod the B13 ones but you just need to keep buying one the one that is 2 pieces you can put it on the passsenger and rear one

Just fill them with urethane mix you can buy from mcmastercar.com for $40 shipped or so. Had mine filled since 2003 or so and work great.

^^ did you use 60A? 80A? or 94A? hows the vibration?

im using poly to do mines as we speak....

I used 90 originally, you can feel it in the car, used 80 on my other g20 more recently and you can feel that just as much. I'd probably stick to a 60 if possible for daily driving.

i have always used the mcmaster 94A shore in my old b13 and my current p10 and its never given me problems