Thread: P11 with 205 50 15 tires?

Well I need to put some tires on my DD and I was thinking about going with a 20 50 15 on the stock G20 rims. Does anyone have this size tires on stocks? If so any pics?

205/55/15 is the right size for P11. 50s somehow will loose under the P11 fender. I've tried both - P10 with 205/55/15 and P11 with 205/50/15. Both funny. Stick to the 55 height and you will just fine. Sorry, I have no pics. However, 50s will still do the work for you.

Thanks for the reply.

The stock sizes for the p11 are 195 60 r15 and 195 65 r15

here is a list of tires you can fit on the p11

*195/60/15 - 24.2" diameter (35-45mm offset required)*(99-01 Touring)
*195/65/15 - 25" diameter(35-45mm offset required)*(99-02 Standard)
205/50/15 - 23.1" diameter (35-45mm offset required)
205/55/15 - 23.9" diameter (38-45mm offset required)

205/45/16 - 23.3" diameter (35-45mm offset required)
*205/50/16 - 24.1" diameter (35-45mm offset required)*('02 Sport)
215/40/16 - 22.9" diameter (32-45mm offset required)
215/45/16 - 23.6" diameter (38-45mm offset required)
225/40/16 - 23.1" diameter (35-45mm offset required)
225/45/16 - 24" diameter (42-45mm offset required)
225/50/16 - on stock 16 inch sport wheels (according to Marty)

205/40/17 - 23.5" diameter (35-45mm offset required)-reinforced sidewall recommended
205/45/17 - 24.3" diameter (38-45mm offset required)
205/50/17 - 25.1" diameter (38-45mm offset required)
215/40/17 - 23.8" diameter (38-45mm offset required)
215/45/17 - 24.7" diameter (40-45mm offset required)
225/40/17 - 24.1" diameter (42-45mm offset required)
225/45/17 - 25.1" diameter (42-45mm offset required)

215/35/18 - 23.9" diameter (38-45mm offset required)-reinforced sidewall recommended
215/40/18 - 24.8" diameter (40-45mm offset required)
225/35/18 - 24.2" diameter (42-45mm offset required)
225/40/18 - 25.1" diameter (42-45mm offset required)

215/35/19 - 24.9" diameter (42-45mm offset required)
225/35/19 - 25.2" diameter (42-45mm offset required)

borrowed from this page...
http://www.g20.net/forum/showthread.php?t=9687

My intentions are to lower the car on stocks and I want to run a wider tires but at the same time I do not want to run a tire that will make the car look like a big foot.

I want the tire to bubble out a bit to the side. I figures a 205 would be ok just torn on the profile. I was thinking 50 but, now leaning toward 55 since the 50 may look to small in height.