Thread: 2.0 B13 Clutch and Diff Install

Looking to install a rebuilt OEM LSD in by B13 SE-R. Figured I might as well do clutch while I'm at it. Car is used primarily for autocross and track duty and has roughly stock power levels. Previous owner had JWT pressure plate with B15 clutch and Fidanza flywheel and that's worked well so far. Plan to get a replacement friction surface for the flywheel. Here's my parts list to order from you:

Your diff install parts
Your stage 3 clutch kit bundle

What am I missing that I should have or do while I have everything apart?

be aware, the plastic speedo gear is no longer available from Nissan. it will have to be swapped, so be very careful removing it. other than that, you look good. I can heklp with the friction plate too.

Thanks for the heads up. Haven't talked to the guy rebuilding my diff but I assume he will have to remove the speedo gear for the rebuild so I'll pass the info along.

What's the total since I won't be able to get the speedo gear but will go ahead and source the friction plate from you?

Diff install parts (bearings really)
Stage 3 clutch kit bundle
Fidanza Friction Plate (I assume for part # 143621)

diff install parts (w/o gear) $246.38
Stage 3 clutch $407.77
friction plate $65
est shipping $35