Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Clutch Cable:

+ Reply To Thread
Posts: 11-15 of 15
2012-09-02 18:33:38
#11
2.0L b13
Last edited by MR-4Door-SR20DET on 2012-09-02 at 18-33-45.
2012-09-02 20:43:51
#12
Still waiting on the B14 clutch cable. Making sure everything was fine with the shipment?
2012-09-02 21:19:33
#13
Originally Posted by MR-4Door-SR20DET
- I might need one for a 2.0L B13. I'm going to Nissan tomorrow as I want to get my car on the road this weekend. If I have to order from them and wait, I'll just get it from you.

http://www.sr20-forum.com/798642-post50.html

^Appparently the short cables will not work with a trans saver bracket.


It will work. The bracket doesn't cause the mounting location for the cable to move. It's remains in the original location.
2012-09-03 01:15:07
#14
- I eventually made the short cable fit, but I had to remove the rubber bushing from the cable where it fits in the spacer and the other one on the end where you adjust it to have enough slack to loop it over the shift arm.

- The B14 1.6 and 2.0 are different than the B13 2.0 cable.



^This picture shows the difference.
Last edited by MR-4Door-SR20DET on 2012-09-03 at 01-27-29.
2014-10-14 22:36:38
#15
Originally Posted by MR-4Door-SR20DET
- I eventually made the short cable fit, but I had to remove the rubber bushing from the cable where it fits in the spacer and the other one on the end where you adjust it to have enough slack to loop it over the shift arm.

- The B14 1.6 and 2.0 are different than the B13 2.0 cable.



^This picture shows the difference.


Does anyone know how long the 91-96 G20 cable is compared to the B13 and B14?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top