Thread: B13 Front Camper Platets for OE Diamter Springs

Greg,

If you build it, they will come.

As I'm sure you know, there was recently a group buy for Hypercoil springs.. I can't believe you didn't pick up 10 to have in stock.. LoL

anyway, the back fender wells are lower than the front, making the car look like it wasn't lowered evenly.. Road Magnet springs have more drop in front to accomodate this.

For the Hypercoil people, there is only one fix. A camber plate made to go with OE diamater springs and effectively enable you to lower the car another inch and not lose any travel is in demand...

Do you have the resources to make this? I know Joe (Happynole) and a few others who would buy them if someone could make these.

git-er-done!
Matt

not going to happen, most camber plates are taller if not the same height as the stock mounts.

edit: making a solid 1 piece top hat/spring seat may work and if it does, it's like .25".

edit #2" something like a mep mounts from the P chassis!

you sound a bit confused.. lol

i was at first

Project Infiniti G20 Racecar - Suspension & Handling Goodies

you need something like this but a Camber plate will not do what you want it too.

right, i do not care if its a camber plate, a pillow-ball mount or what.. as long as it lowers the front end 3/4 an inch and does not affect suspension travel.

thanks for the link man! this will help out Greg, he is already looking into it (communicated a little via email)

there's a guy on g20.net names ESPsentra, he makes then for the P guys.

damn g20.net is sloooow today

and ESPsentra is not a user that is coming up..

this thread??

G20.net - Forums

oops, dmsentra

http://www.g20.net/forum/showpost.php?p=1458414&postcount=281

same as Mep but Mep don't make them anymore.

If I made some for B13 like his, with the upper spring plate and mount as 1 piece, I think at the max, maybe .5" could be gained. The other thing that concerns me, is the loss of rotating bearing in there. See, P10 and p11 struts don'r rotate with the wheel, but ours do.