Thread: SS brake lines for wilwood brake combo

As christmas is fast approaching new ss brake lines are on my wishlist. I drive a 92' se-r with the dynalite 11" brake kit, and stock rear disks. Could you get a brake line kit together, and if so cost?

$130 per set, and i can custom make it for your application.

Sweet. Any info you need from me? The rear brakes are easy enough, but the front have ss lines with a male end that go into the caliper then up to an adapter that then goes into the factory male hard line fitting.

I would like a line that goes from the factory male hard line to an adapter (so I can use the clip to secure the line) then to an ss line then to the caliper. No problem there?

If I use a straight line from the hard line male fitting to the caliper without an adapter I don't think there is a way for me to lclip the line up other then tie wraps.

What I typically supply for the Wilwood calipers is a line with the OEM female on the body side, then an AN fitting on the caliper side with the fitting that screws into the caliper for the AN fitting.

That would be ok. If someone calls you wanting a set of brake lines for PWRDbyUNCLEbens then this is the setup i need.