Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: NX2K brake rebuild kit & Hardware parts.

+ Reply To Thread
Posts: 1-10 of 19
2008-01-10 03:03:53
#1
NX2K brake rebuild kit & Hardware parts.
Hey Greg I need the FULL rebuild kit for my NX2K brakes and all new hardware parts (slide pins, boots, grease,brackets,etc)

How much shipped to Atlanta, GA.

Thank you.
2008-01-10 03:11:09
#2
$36 to you
2008-01-10 03:26:32
#3
Where do I send El Dinero $$$ ??
2008-01-10 05:50:48
#4
Call me if you want to pay by CC#, or paypal below.

2008-01-10 09:50:51
#5
Greg, since I will definitely be needing those as well (probaly to be sent along with the P@t cam gears when they are available), can we re-iterate here what the rebuild kit contains and whether it is from Nissan or some other source? Last time this issue was brought up there was some confusion on whether there was a boot missing from the "kit" or something...

I will be needing any and all repair stuff for all 4 brakes, and I am talking about your infamous ABS Japan Made for the NX. (ADV22F fronts and whatever the rears are).

IIRC, there was a Hardware Kit, a Seal Kit and a Shim Kit for any caliper. Right? What does the $36 price cover from those? ANd is it for one or 2 calipers? etc., etc...
2008-01-10 16:41:56
#6
OK, I'll try to go in order...
The cam gears may be ready within 1 week.
The kits are now available from Nissan, and they do include the pin boots and grease.
The NX master cylinder w/ABS is $192.70
There is a hardware kit and a seal kit for just about everything, and usually 1 part# covers both sides.
2008-01-10 17:38:40
#7
Originally Posted by GregV
OK, I'll try to go in order...
The cam gears may be ready within 1 week.
The kits are now available from Nissan, and they do include the pin boots and grease.
The NX master cylinder w/ABS is $192.70
There is a hardware kit and a seal kit for just about everything, and usually 1 part# covers both sides.


OK, lets take it from the top then because we always mess it up!!

Before charging for the cam gears we need to arrange the following:

A. Front.

1. Seal kits for ADV22Fs
2. HW Kit for ADV22F
3. Shim Kit for ADV22F

If there is any redundancy above, correct me!

B. Rear

1. Seal kits for XYZ (same calipers as in rear of ADV22F-front equipped NXs, I will get the exact # if not available to you.
2. HW Kit for XYZ
3. Shim Kit for XYZ

I assume none of the above contains the sliding pins so,

ADV22F pins (under consideration depending on price).

Finally, since you did mention it... Master Cylinder repair Kit for ABS-equipped ADV22F-front-caliper cars.

2008-01-10 17:56:04
#8
HW and shim kit is the same thing.

Rr calipers may be different with non-US NXs. remember, they had the larger rear rotors.
2008-01-10 17:59:08
#9
estimate sent
2008-01-11 10:37:05
#10
anyway you can get the driver side bracket that holds the pads? :/ my holes are stripped on mine
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top