Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: Need quick specs, guys...

+ Reply To Thread
Posts: 11-15 of 15
2008-08-27 16:09:08
Okay, so what's the max on this turbo? Is it at all capable of 500hp? You mentioned stage 5 with a T67 compressor wheel, would the housings even work with this wheel?
2008-08-27 16:15:35
even if it's possible, i wouldn't want to run a stage 5 wheel on a .48 turbine housing.

350hp i think is max. what car is this going on?

is all he want is 500hp?

Tekk, you know I'm a different kind of guy that likes different things.

EDIT: if you to keep it simple, measure the wheel to make sure it's atleast a Stage 3 wheel, should measure 2.559" (65mm) on the big end and 2.228" (57mm) on the small end. if it is, add the T67 compressor wheel to it. should make 500hp
2008-08-27 17:05:05
This is going on a Mazda MX3.
2008-08-27 17:28:12
You will need the bigger exhaust housing to make 500. It is very hard to make over 500whp on a .48. A .63 will make it...
2008-08-27 17:41:11
yeah those are the secs of the "super 60" . its only good for 350ish but if you upgrade the exhaust housing to .63 you might be able to push 450ish
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top