Thread: piecing together a turbo kit... need advice

i just need the wastegate actuator for a t25

Stock aviener blow off valve (recirculation valve) is the same as a 1g dsm.

If you wanna run 12psi you'll need a bigger maf, 370's at 4bar or bigger injectors, walbro fuel pump, afpr. I wouldnt run anything higher than 12psi just to be safe on a 9.5:1 CR motor.



Take your time do it in steps, You'll thank me.

you should be able to find one of those easy

im still looking but no luck yet

STi Injectors 440's for $20.? that's a damn RIPOFF.
you go and tell his ass that I will give him $40 plus shipping.. OUTRAGEOUS!!...
No fellow Sr20 member of mine will get robed like that..



I think I have one.

hahahahaha
nah i think i wouldnt mind getting robbed

Also look into a Calum Basic ECU as it is the cheapest way you can go at the moment for a tuned ECU. I have one and it's great. If your looking to take more control of your ECU get the Realtime.

how much? and i couldve sworn that wasnt there when i quoted u b4

what maf should i use?

ok so i went to look at the turbo yesterday... my friend had said it was a garrett t25 when i looked at it i found out it was a kkk03 (audi turbo) so anyone know if this is the same as a t25 flange?