Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: ANy body have one of these ???

+ Reply To Thread
Posts: 1-8 of 8
2008-07-30 15:18:55
#1
ANy body have one of these ???
I was wondering of anybody had one of these ??

http://store.forcedperformance.net/merchant2/merchant.mvc?Screen=PROD&Store_Code=FP&Product_Code=NTGT3582HTA

I was wondering what the spool time was like ??? they say it is faster then the Gt35r , but I am wondering if it is as fast or faster then the GT3676r that I have ...with everthing I have bough I am still worried that the car wont make 500whp on race gas ..but I am sure this would do it ..but mayby I just need to get it in the car and see how it does once tunned
2008-07-30 21:19:50
#2
I am going to be sending my 35r to them to make it an HTA35R but I will have a 1.06 a/r.
2008-07-31 17:45:47
#3
Originally Posted by nissan
I was wondering of anybody had one of these ??

http://store.forcedperformance.net/merchant2/merchant.mvc?Screen=PROD&Store_Code=FP&Product_Code=NTGT3582HTA

I was wondering what the spool time was like ??? they say it is faster then the Gt35r , but I am wondering if it is as fast or faster then the GT3676r that I have ...with everthing I have bough I am still worried that the car wont make 500whp on race gas ..but I am sure this would do it ..but mayby I just need to get it in the car and see how it does once tunned


I have seen a SC61 car make over 500 whp. So there should be no reason that one would not.
2008-07-31 18:11:34
#4
^^^^^ like he said, there has been a few guys on the other forum that have made over 500whp on sc61 so i dont see any reason that it would not, there many honda's around here pushing over 500whp some up up to 550whp running 10s
2008-07-31 20:02:40
#5
Its all in tuning...
2008-07-31 21:58:48
#6
I have buddies that run forced performance turbos, and must say they are DAMN nice pieces. Only draw back is they take forever to get because they are custom built to order. My buddy waited four months for his 3065 for his laser, but well worth it.

I would do it for the simple fact that you don't see many fp turbos blowing up, with the exception of the 3575. The money is well justified, and the wait as well. Anything they tweak to make better is very good ****.
2008-07-31 22:01:02
#7
I personally have never seen a gt30 car put down more than 520 hp, or hold much more than 28lbs of boost for more than 3500-4000 rpm. That turbo had the .82ar back side also. I have dealt with a lot of these turbos on DSM's, and they just really won't push that much boost, and these are properly built cars with all supporting mods, and tuning software.

I would also rather make 350-400hp for 4500 rpm as opposed to 500-550hp for 3000 rpms.
2008-08-01 20:51:09
#8
^ i agree the problem with these rturbos is most ppl dont have supporting mods for lower power pickup, like proper cams, proper low to mid range power mods that make these turbos pick up faster, that way the rpm powerband isnt so short...

i agree would much rather have a bigger powerband with less power than more power and less powerban...you run into alot of traction issues with on off boost
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top