Thread: FWD SR20 turbo manifold.

Does anyone actually make something other than a log manifold with a t3/t/4 flange for the fwd sr20 anymore? Is used going to be my option here?

Protech is still around you can get ahold of him on Facebook

Bruce from protech is fantabulous, there are also one off guys available to build you one as well.

i should have throw "affordable" in the mix lol

Buy the Mazwoxs manifold kit and build your own. Much more affordable.

I'd be nice to some some diy ones, I have a decent MIG setup... never done anything nice looking though

I bought this with some intent on hacking it up....

Top Mount T3 T4 Turbo Manifold 38mm WG Flange for 89 98 240sx s13 s14 SR20DET | eBay

Anyone ever using something of this style, top mount appears to sit the turbo between cylinders 2 and 3... not sure if it will clear the hood.

It's prob going to crack on you fair warning.

I used one and it did crack, I cut of the t3/t4 flange and got it re welded parallel to the head flange to take out the angle for the silvia and also to reduce the height, it cracked by the waste gate, but to be fair I made an adapter to move the waste gate to the side and that was extra weight along with the waste gate and the dump tube, if you can redo all the welds and brace from the head flange to the turbo flange it should be okay.

I returned that one, just bought the flanges and will take a stab at welding one up : /