Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: i need help with my setup

+ Reply To Thread
Posts: 21-23 of 23
2014-05-22 13:26:04
#21
Originally Posted by se200
Looks like you have a really good t25 setup. Get a log manifold for the new turbo you got and adjust your hot side intercooler piping and down pipe. Get a SAFC and n60/maxima maf to tune the larger injectors and support higher hp. You should be able to dial that car in on 300hp easy with those upgrades. A tuned ecu or stand alone is always best but a SAFC tuned on top of the det ecu will do the trick. Good luck man.


wat size injectors would you think i should get
2014-05-22 13:39:21
#22
Side feed 550cc will be the limit if you use a SAFC. The 550cc also support 325-350hp so they should work well or you.

I'm not sure what injectors you can get easy but here are some options.
550cc aftermarket sidefeed for Nissan
440cc s15 sidefeed injectors good for 300hp with pressure control
Subaru sti 520cc injectors sidefeed these need Subaru lips but supports over 300hp

Figure out what management your going to run then you will know your limit.
SAFC can only control 50% over stock(and this is even pushing it) so a 370cc tuned ecu can run 185cc larger injector. So your limited to 555cc controllable range. Make the 550cc inj the largest injector you can tune with the SAFC

If you can afford the nismotronic SA I would get it. I run it on my b13 and you will never hit a limit of tuneabillity with it. Best option for our cars.
Last edited by se200 on 2014-05-22 at 13-51-01.
2014-05-22 13:50:04
#23
Originally Posted by se200
Side feed 550cc will be the limit if you use a SAFC. The 550cc also support 325-350hp so they should work well or you.


thank alot for the help anybody on here sell the 550cc injector and the MAF
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top