Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: Starting my SR20VE+T Build. Need some knowledge!

+ Reply To Thread
Posts: 31-32 of 32
2014-03-13 17:56:48
Originally Posted by blackngreenb14
Not bad advice at all. The only real benefit for going T2 is that I should be able to re-use most of what I already have.

Doug Fab suggests externally wastegated T2. I like the idea, but it would require me to get a T2 turbo without an internal wastegate, which I haven't been able to find. I've mostly been looking at garrett though. I'll check out precision and greddy today.

running a t2 external gate is real simple. two spot welds on the flapper and a brace on the arm. this makes the process easy to reverse. Remember if you start with a t2 manifold your turbo options are limited. if you start with a t3 manifold you can still run a t2 based turbo with a garrett t25 plus housing which gives you a t3 mounting flange and no internal gate.
2014-03-13 18:01:12
More good advice. Thank you.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top