Thread: SR20 T3 top mount manifold from TRACKFORGED

Very nice.

Thanks mike for the follow up. I am still on vacation, so I pm'd you back and will work with my guys to get everything to clear. Thanks for posting up the pictures and look forward to doing more work for the community.

one more pic with the radiator support and radiator out of the way

Looks like the wastegate placement would also limit options on routing the IC piping. How are you routing yours?

it looks like there should be just enough room.

edit: looks like with the vband setup he could clock the wg the other way an dump it out the driver side of xmember instead if he wanted to.

Hot and cold on the drivers side. I have to change the intercooler but already have the new unit.

Back in town bump, thanks again Mike for the follow up

the only other thing I found was that you need to use a non oem nut on the exhaust stud beside the number 2 runner. I went to the hard ware store and got a nut that would clear and the problem was solved. manifold, turbo and down pipe all now mounted to the car. I also have the oil feed and return run. Should have the car up and running again in the next few days. I only need to make room for the new ic and and make new hot side piping.

wow they really got that thing so it sucks right up to the engine, big turbo for such little space hehe!

Yea the turbo is tucked up a bit close to the vc, manifold tends to grow under heat.